🥊 Dji Phantom 3 Professional Camera Not Working

Open File Explorer. Under the “Devices and drives” section, right-click the SD card and select the Format option. Under the “File system” drop-down menu and select the exFAT option. This process can be a little different on Mac and Linux. 2. Factory reset your drone. Hi, thanks for the screen-shots, I do suggest to send in this for repairs for us to assess some parts of the gimbals have been damaged. Kindly try as well to refresh the firmware of your aircraft. If the issues still persist, it really needs to send in the aircraft for repairs. Hope this helps. It takes 15-20 minutes for the aircraft, during that time you should hear 4 faint beeps and the camera LED flash Red/Green. Then when it's finished you should hear 3 beeps and the camera LED will be solid Green. And you can verify what firmware you are on by looking in the general settings and scrolling down to About. Jan 30, 2016. #7. John N Kronyak said: Has nothing to do with the internet. The satellites should generate the maps. Don't have a solution. Nope, he needs to cache the map or have wifi or data to get the maps, the drone uses satellites for GPS location, they do not provide maps. Using the DJI GO app (Option 1) (Compatible using Phantom 3 Standard or 4K) Turn on the Aircraft and the Remote Controller. Connect to your Aircraft’s Wi-Fi network as normal. Launch the DJI Go app using your phone or tablet. Tap the prompt at the top of the screen telling you that ‘New firmware update is available’. DJI 4K Camera for Phantom 3 Professional Quadcopter, Anti-Drop Kit and Vibration Dampers Video Capture Resolution DCI 4K (4096 x 2160): 24p, 25p, UHD 4K (3840 x 2160): 24p, 25p, 30p, 1080p (1920 x 1080): 24p, 25p, 30p, 48p, 50p, 60p and 720p (1280 x 720): 24p, 25p, 30p, 48p, 50p, 60p See more 3#. The "Red" light on your RC means there is no communication between it and your phantom. Try to re-link them. You need to go into the App and under settings select "Link". After which you need to push in the button just above your gimbal. One is the LED and one is a link button. If you can fly the flight, but the DJI Phantom 4 camera is not working correctly, it can be the most annoying problem you will face. When it comes to the camera, it can be a serious issue. You can handle some of the small problems if you learn some technical things. Western US. Aug 5, 2019. #6. glenncol said: Hi all. I updated to the latest firmware on my Phantom 3 Advanced and the camera has stopped working, the gimbal responds as it should as does the flight controls of the drone itself, We have tried deleting and reinstalling the Go App and a few different Micro USB cables. The Phantom 3 Professional captures 4K video at either 23, 24 or 30 frames per second, which eliminates the advantage of using a GoPro in most cases. There are also a few new tricks in the camera One is performing this on a phantom 3 advanced or professional (no idea if the other phantoms are the same). One has copies of the official firmware files; One has a copy of an earlier DJI Go version (2.4.2, I found a copy on apkbeast) Shorthand used: p3a: Phantom 3 Advanced; p3p: Phantom 3 Professional; AC or bird: Aircraft (the phantom Phantom 3 1.2.6/1.2.8 Firmware Update Issues and Resolutions At DJI we are dedicated to creating the world’s most advanced flying platforms and camera stabilization systems. This dedication extends to ourdesire to provide quality products that meet and exceed the needs of our customers. Recently however, we have had reports of a number of issues arising from our latest firmware upgrade ec4Fo.

dji phantom 3 professional camera not working